Using rdiff-backup with SSHFS

Rdiff-backup is an open source backup system that performs incremental, differential backups on a wide variety of platforms. Many people use rdiff-backup on both sides of a backup operation, but this can be problematic when different operating systems or rdiff-backup versions are in use.

This guide will show you how to use rdiff-backup with SSHFS to pull data to the backup storage server, rather than pushing from the device you wish to back up. This eliminates the need to run rdiff-backup on the server being backed up. It is assumed you have a local machine such as a laptop or home workstation with data you want to back up to a remote server, which will be your Linode.

Note

Throughout this guide, backup server will be used to indicate the machine (probably your Linode) which will be running rdiff-backup. This is also where all copies of other machines’ backup data will be stored.

The machines with data being backed up to the backup server, will be referred to as a remote device. Each remote device also must have its own static IP address.

1. SSH in to your backup server.

2. Install rdiff-backup and SSHFS. How you do this depends on the Linux distribution running on your backup server, but distributions based on Debian and RedHat use the package names rdiff-backup and sshfs.

3. SSH in to your backup server.

4. Add a user to run rdiff-backup as, and add that user to the system’s fuse user group. The username rdbadmin is used as an example, and backups will be stored in this user’s home directory.

   adduser rdbadmin
   usermod -aG fuse rdbadmin
   

5. Create a directory structure for mounting the remote filesystem and storing backups. You can organize this however you like, but the example will sort backup directories by the hostname of the device its backups corresponds to.

   mkdir /home/rdbadmin/mounts/device_hostname
   mkdir /home/rdbadmin/backups/device_hostname
   chown -R rdbadmin:rdbadmin /home/device_hostname
   

Your backup server will be pulling data from remote devices by SSHFS, so SSH must be configured on the remote device or devices to allow access for the rdbadmin user from the backup server.

1. You should still be logged in to the backup server by SSH. Create an SSH keypair for the rdbadmin user. This will create the files ~/.ssh/rdbadmin.pub and ~/.ssh/rdbadmin:

   ssh-keygen -b 4096 -f rdbadmin
   

2. Transfer the public key to the remote device to be backed up. Replace the IP address in the example below with that of your device:

   ssh-copy-id rdbadmin@203.0.113.10
   

3. Add the output of the cat command to the authorized_keys file on the remote device:

   ssh user@remote_IP "echo \`cat ~/.ssh/rdbadmin.pub\` >> ~/.ssh/authorized_keys"
   

1. Add the remote device’s mount point to the backup server’s fstab file. This will allow the rdbadmin user to mount and read the remote filesystem. It will be mounted read-only as a basic safeguard.

   You’ll need to specify the remote device’s login information so change the value for user@remotehost appropriately. Change remote_path to the top-level directory on the remote device you want to create a back up of.

   File: /etc/fstab

   1	<sshfs#user@remotehost>:/remote_path /home/rdbadmin/device_hostname fuse user,noauto,ro 0 0

2. Run a test backup, changing the values where appropriate to match the earlier steps. First witch to the rdbadmin user if you have not already, and mount the remote device’s directory to back up. If you don’t have any data there yet, create three empty files just so something can move between the servers. Then run the backup.

   su - rdbadmin
   mount /home/rdbadmin/mounts/device_hostname
   touch {file1,file2,file3}
   rdiff-backup -v5 /home/rdbadmin/mounts/device_hostname /home/rdbadmin/backups/device_hostname
   

3. When the backup completes, examine the contents of /home/rdbadmin/backups/device_hostname on the backup server to make sure everything was copied over correctly.

1. Create a shell script to mount the remote directory, run rdiff-backup, and unmount the remote directory when finished. Adjust the values for directories to meet your own needs.

   File: /home/rdbadmin/backup.sh

   1 2 3 4

   #!/bin/sh mount /home/rdbadmin/mounts/device_hostname rdiff-backup /home/rdbadmin/mounts/device_hostname /home/rdbadmin/backups/device_hostname umount /home/rdbadmin/mounts/device_hostname

2. Make the script executable:

   chmod +x /home/rdbadmin/backup.sh
   

3. Add the following entry to the rdiffbackup user’s crontab (edit it with crontab -e) to perform daily backups at 2:00 AM.

   00 02 * * * /home/rdbadmin/backup.sh
   

   See man cron in a terminal for more information on creating cron jobs.

1. To restore a backup, first mount the restore path:

   mount /home/rdbadmin/mounts/device_hostname
   

2. Issue a command on the backup server similar to the following, adjusting for your directory paths and needs. This will restore the most recent version of your backup directory to the location the backup was created from above.

   Beware that the restore directory will be entirely overwritten. Take care not to specify a directory that contains anything you wish to keep.

   rdiff-backup -r now /home/rdbadmin/backups/device_hostname /home/rdbadmin/mounts/device_hostname
   

   Rdiff-backup also supports restoring filesystems as they exist at specific points in time. As another example, you could use the command below to restore the remote host’s backed up files as they were ten days ago:

   rdiff-backup -r 10D /home/rdbadmin/backups/device_hostname /home/rdbadmin/mounts/device_hostname
   

3. When the backup has been restored, unmount the restore path:

   umount /home/rdbadmin/mounts/device_hostname