LAMP Server on Fedora 20

This guide provides step-by-step instructions for installing a full-featured LAMP stack on a Fedora 20 system. In this guide, you will be instructed on setting up Apache, MySQL, and PHP. If you don’t feel that you will need MySQL or PHP, please don’t feel obligated to install them.

Note

The steps required in this guide require root privileges. Be sure to run the steps below as root or with the sudo prefix. For more information on privileges see our Users and Groups guide.

Throughout this guide we will offer several suggested values for specific configuration settings. Some of these values will be set by default. These settings are shown in the guide as a reference, in the event that you change these settings to suit your needs and then need to change them back.

Before you begin installing and configuring the components described in this guide, please make sure you’ve followed our instructions for setting your hostname.

Issue the following commands to make sure it is set properly:

hostname
hostname -A

The first command should show your short hostname, and the second should show your fully qualified domain name (FQDN).

The Apache Web Server is a very popular choice for serving web pages. While many alternatives have appeared in the last few years, Apache remains a powerful option that we recommend for most uses.

Make sure your system is up to date by issuing the following command:

yum update

To install the current version of the Apache web server (in the 2.x series) use the following commands:

yum install httpd
systemctl enable httpd.service
systemctl start httpd.service

The main configuration directives for Apache are contained in the httpd.conf file, which is located at /etc/httpd/conf/httpd.conf. We advise you to make a backup of this file into your home directory, like so:

cp /etc/httpd/conf/httpd.conf ~/httpd.conf.backup

By default, all files ending in the .conf extension in /etc/httpd/conf.d/ are treated as configuration files, and we recommend placing your non-standard configuration options in files in this directory. Regardless of how you choose to organize your configuration files, making regular backups of known working states is highly recommended.

Edit the main Apache configuration file to add these resource use settings, or create a new .conf file in /etc/httpd/conf.d/. The settings shown below are a good starting point for a Linode 2GB.

File: /etc/httpd/conf/httpd.conf

1 2 3 4 5 6 7 8 9

KeepAlive Off <IfModule prefork.c> StartServers 4 MinSpareServers 20 MaxSpareServers 40 MaxClients 200 MaxRequestsPerChild 4500 </IfModule>

Now we’ll configure virtual hosting so that we can host multiple domains (or subdomains) with the server. These websites can be controlled by different users, or by a single user, as you prefer.

Before we get started, we suggest that you combine all configuration on virtual hosting into a single file called vhost.conf located in the /etc/httpd/conf.d/ directory. Open this file in your favorite text editor, and we’ll begin by setting up name based virtual hosts.

There are different ways to set up Virtual Hosts, however we recommend the method below. By default, Apache listens on all IP addresses available to it.

Now we will create virtual host entries for each site that we need to host with this server. Here are two examples for sites at “example.com” and “example.org”.

File: /etc/httpd/conf.d/vhost.conf

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

<VirtualHost *:80> ServerAdmin webmaster@example.com ServerName example.com ServerAlias www.example.com DocumentRoot /var/www/example.com/public_html/ ErrorLog /var/www/example.com/logs/error.log CustomLog /var/www/example.com/logs/access.log combined </VirtualHost> <VirtualHost *:80> ServerAdmin webmaster@example.org ServerName example.org ServerAlias www.example.org DocumentRoot /var/www/example.org/public_html/ ErrorLog /var/www/example.org/logs/error.log CustomLog /var/www/example.org/logs/access.log combined </VirtualHost>

Notes regarding this example configuration:

• All of the files for the sites that you host will be located in directories that exist underneath /var/www. You can symbolically link these directories into other locations if you need them to exist in other places.
• ErrorLog and CustomLog entries are suggested for more fine-grained logging, but are not required. If they are defined (as shown above), the logs directories must be created before you restart Apache.

Before you can use the above configuration, you’ll need to create the specified directories. For the above configuration, you can do this with the following commands:

mkdir -p /var/www/example.com/{public_html,logs}
mkdir -p /var/www/example.org/{public_html,logs}

After you’ve set up your virtual hosts, issue the following command to reload Apache with your new virtual hosts:

systemctl reload httpd.service

Once you have reloaded Apache, you can use the following command to confirm that your Virtual Hosts settings are correct

/usr/sbin/httpd -S

Assuming that you have configured the DNS for your domain to point to your Linode’s IP address, virtual hosting for your domain should now work. Remember that you can create as many virtual hosts with Apache as you need.

Any time you change an option in your vhost.conf file, or any other Apache configuration remember to reload the configuration with the following command:

systemctl reload httpd.service

MySQL is a relational database management system (RDBMS) and is a popular component in contemporary web development tool chains. It is used to store data for many popular applications, including WordPress and Drupal.

The first step is to install the mysql-server package, which is accomplished by the following command:

yum install mysql-server

If you want to run MySQL by default when the system boots, which is a typical setup, execute the following command:

systemctl enable mariadb.service

Now you can start the mysql daemon (mysqld) with the following command:

systemctl start mariadb.service

MySQL should be ready to configure and run. While you shouldn’t need to change the configuration file, note that it is located at /etc/my.cnf for future reference. The default values should be fine for a Linode 2GB, but if you decide to adjust them you should first make a backup copy:

cp /etc/my.cnf ~/my.cnf.backup

After installing MySQL, it’s recommended that you run mysql_secure_installation, a program that helps secure MySQL. While running mysql_secure_installation, you will be presented with the opportunity to change the MySQL root password, remove anonymous user accounts, disable root logins outside of localhost, and remove test databases. It is recommended that you answer yes to these options. If you are prompted to reload the privilege tables, select yes. Run the following command to execute the program:

mysql_secure_installation

Next, we’ll create a database and grant your users permissions to use databases. First, log in to MySQL:

mysql -u root -p

Enter MySQL’s root password, and you’ll be presented with a prompt where you can issue SQL statements to interact with the database.

To create a database and grant your users permissions on it, issue the following command. The semi-colons (; characters) at the end of the lines are crucial for ending the commands. Your command should look like this:

create database lollipop;
grant all on lollipop.* to 'foreman' identified by '5t1ck';

In the example above, lollipop is the name of the database, foreman is the username, and 5t1ck password. Note that database user names and passwords are only used by scripts connecting to the database, and that database user account names need not (and perhaps should not) represent actual user accounts on the system.

With that completed, you’ve successfully configured MySQL and you may now pass these database credentials on to your users. To exit the MySQL database administration utility issue the following command:

quit

With Apache and MySQL installed you are now ready to move on to installing PHP to provide scripting support for your web pages.

PHP makes it possible to produce dynamic and interactive pages using your own scripts and popular web development frameworks. Furthermore, many popular web applications like WordPress are written in PHP. If you want to be able to develop your websites using PHP, you must first install it.

Fedora includes packages for installing PHP from the terminal. Issue the following command:

yum install php php-pear

Once PHP5 is installed, we’ll need to tune the configuration file located in /etc/php.ini to enable more descriptive errors, logging, and better performance. These modifications provide a good starting point if you’re unfamiliar with PHP configuration.

Make sure that the following values are set, and relevant lines are uncommented (comments are lines beginning with a semi-colon (; character)):

File: /etc/php.ini

1 2 3 4 5 6 7 8

error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR display_errors = Off log_errors = On error_log = /var/log/php/error.log max_execution_time = 30 memory_limit = 128M register_globals = Off max_input_time = 30

You will need to create the log directory for PHP and give the Apache user ownership:

mkdir /var/log/php
chown apache /var/log/php

If you need support for MySQL in PHP, then you must install the php5-mysql package with the following command:

yum install php-mysql

You can test PHP by creating a file with the following contents under your “public_html” directory:

File: /var/www/example.com/public\\_html/test.php

1	<?php phpinfo(); ?>

You will need to restart Apache before php scripts will work:

systemctl restart httpd.service

When you view this page in your browser, you should be presented with detailed PHP configuration information.

More Information

You may wish to consult the following resources for additional information on this topic. While these are provided in the hope that they will be useful, please note that we cannot vouch for the accuracy or timeliness of externally hosted materials.

• Fedora Home Page
• Apache HTTP Server Documentation
• MySQL Documentation
• PHP Documentation