Why Linode
Get to Know Us Better
View All Products
Compute
Storage
Databases
Services
Networking
Developer Tools
Delivery
Security
View All Solutions
Solutions
Pricing
Community
Engage With Us

Import Existing Infrastructure to Terraform

Updated , by Linode
Traducciones al Español
Estamos traduciendo nuestros guías y tutoriales al Español. Es posible que usted esté viendo una traducción generada automáticamente. Estamos trabajando con traductores profesionales para verificar las traducciones de nuestro sitio web. Este proyecto es un trabajo en curso.
Create a Linode account to try this guide with a $ credit.
This credit will be applied to any valid services used during your first  days.

Terraform is an orchestration tool that uses declarative code to build, change, and version infrastructure that is made up of server instances and services. You can use Linode’s official Terraform provider to interact with Linode services. Existing Linode infrastructure can be imported and brought under Terraform management. This guide describes how to import existing Linode infrastructure into Terraform using the official Linode provider plugin.

Note
Terraform’s Linode Provider has been updated and now requires Terraform version 0.12+. To learn how to safely upgrade to Terraform version 0.12+, see Terraform’s official documentation. View Terraform v0.12’s changelog for a full list of new features and version incompatibility notes.

Before You Begin

  1. Terraform and the Linode Terraform provider should be installed in your development environment. You should also have a basic understanding of Terraform resources. To install and learn about Terraform, read our Use Terraform to Provision Linode Environments guide.

  2. To use Terraform you must have a valid API access token. For more information on creating a Linode API access token, visit our Getting Started with the Linode API guide.

  3. This guide uses the Linode CLI to retrieve information about the Linode infrastructure you import to Terraform. For more information on the setup, installation, and usage of the Linode CLI, check out the Using the Linode CLI guide.

Terraform’s Import Command

Throughout this guide the terraform import command is used to import Linode resources. At the time of writing this guide, the import command does not generate a Terraform resource configuration. Instead, it imports your existing resources into Terraform’s state.

State is Terraform’s stored JSON mapping of your current Linode resources to their configurations. You can access and use the information provided by the state to manually create a corresponding resource configuration file and manage your existing Linode infrastructure with Terraform.

Additionally, there is no current way to import more than one resource at a time. All resources must be individually imported.

Caution
When importing your infrastructure to Terraform, failure to accurately provide your Linode service’s ID information can result in the unwanted alteration or destruction of the service. Please follow the instructions provided in this guide carefully. It might be beneficial to use multiple Terraform Workspaces to manage separate testing and production infrastructures.

Import a Linode to Terraform

Retrieve Your Linode’s ID

  1. Using the Linode CLI, retrieve a list of all your Linode instances and find the ID of the Linode you would like to manage under Terraform:

    linode-cli linodes list --json --pretty

    [
  {
    "id": 11426126,
    "image": "linode/debian9",
    "ipv4": [
    "192.0.2.2"
    ],
    "label": "terraform-import",
    "region": "us-east",
    "status": "running",
    "type": "g6-standard-1"
  }
]

    This command will return a list of your existing Linodes in JSON format. From the list, find the Linode you would like to import and copy down its corresponding id. In this example, the Linode’s ID is 11426126. You will use your Linode’s ID to import your Linode to Terraform.

Create An Empty Resource Configuration

  1. Ensure you are in your Terraform project directory. Create a Terraform configuration file to manage the Linode instance you import in the next section. Your file can be named anything you like, but it must end in .tf. Add a Linode provider block with your API access token and an empty linode_instance resource configuration block in the file:

    Note
    The example resource block defines example_label as the label. This can be changed to any value you prefer. This label is used to reference your Linode resource configuration within Terraform. It does not have to be the same label originally assigned to the Linode when it was created outside of Terraform.
    File: linode_import.tf
    1
2
3
4
5

    provider "linode" {
    token = "your_API_access_token"
}

resource "linode_instance" "example_label" {}

Import Your Linode to Terraform

  1. Run the import command, supplying the linode_instance resource’s label, and the Linode’s ID that was retrieved in the Retrieve Your Linode’s ID section :

     terraform import linode_instance.example_label linodeID

    You should see a similar output:

    linode_instance.example_label: Importing from ID "11426126"...
linode_instance.example_label: Import complete!
  Imported linode_instance (ID: 11426126)
linode_instance.example_label: Refreshing state... (ID: 11426126)

Import successful!

The resources that were imported are shown above. These resources are now in
your Terraform state and will henceforth be managed by Terraform.

    This command will create a terraform.tfstate file with information about your Linode. You will use this information to fill out your resource configuration.

  2. To view the information created by terraform import, run the show command. This command displays a list of key-value pairs representing information about the imported Linode instance.

    terraform show

    You should see an output similar to the following:

    resource "linode_instance" "example_label" {
    backups           = [
        {
            enabled  = null
            schedule = null
        },
    ]
    boot_config_label = "My Debian 9 Disk Profile"
    id                = "15375361"
    ip_address        = "97.107.128.70"
    ipv4              = [
        "97.107.128.70",
    ]
    ipv6              = "2600:3c03::f03c:91ff:fee3:8deb/64"
    label             = "terraform-import"
    private_ip        = false
    region            = "us-east"
    specs             = [
        {
            disk     = 51200
            memory   = 2048
            transfer = 2000
            vcpus    = 1
        },
    ]
    status            = "running"
    swap_size         = 512
    tags              = []
    type              = "g6-standard-1"
    watchdog_enabled  = true

    alerts {
        cpu            = 90
        io             = 10000
        network_in     = 10
        network_out    = 10
        transfer_quota = 80
    }

    config {
        kernel       = "linode/grub2"
        label        = "My Debian 9 Disk Profile"
        memory_limit = 0
        root_device  = "/dev/sda"
        run_level    = "default"
        virt_mode    = "paravirt"

        devices {
            sda {
                disk_id    = 31813343
                disk_label = "Debian 9 Disk"
                volume_id  = 0
            }

            sdb {
                disk_id    = 31813344
                disk_label = "512 MB Swap Image"
                volume_id  = 0
            }
        }

        helpers {
            devtmpfs_automount = true
            distro             = true
            modules_dep        = true
            network            = true
            updatedb_disabled  = true
        }
    }

    disk {
        authorized_keys  = []
        authorized_users = []
        filesystem       = "ext4"
        id               = 31813343
        label            = "Debian 9 Disk"
        read_only        = false
        size             = 50688
        stackscript_data = (sensitive value)
        stackscript_id   = 0
    }
    disk {
        authorized_keys  = []
        authorized_users = []
        filesystem       = "swap"
        id               = 31813344
        label            = "512 MB Swap Image"
        read_only        = false
        size             = 512
        stackscript_data = (sensitive value)
        stackscript_id   = 0
    }

    timeouts {}
}

    You use this information in the next section.

Fill In Your Linode’s Configuration Data

As mentioned in the Terraform’s Import Command section, you must manually create your resource configurations when importing existing infrastructure.

  1. Fill in the configuration values for the linode_instance resource block. In the example below, the necessary values were collected from the output of the terraform show command applied in Step 2 of the Import Your Linode to Terraform section. The file’s comments indicate the corresponding keys used to determine the values for the linode_instance configuration block.

    File: linode_instance_import.tf
     1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30

    provider "linode" {
    token = "a12b3c4e..."
}

resource "linode_instance" "example_label" {
    label = "terraform-import" #label
    region = "us-east"         #region
    type = "g6-standard-1"     #type
    config {
        label = "My Debian 9 Disk Profile"     #config.label
        kernel = "linode/grub2"                #config.kernel
        root_device = "/dev/sda"               #config.root_device
        devices {
            sda {
                disk_label = "Debian 9 Disk"    #config.devices.sda.disk_label
            }
            sdb {
                disk_label = "512 MB Swap Image" #config.devices.sdb.disk_label
            }
        }
    }
    disk {
        label = "Debian 9 Disk"      #disk.label (filesystem = "ext4")
        size = "50688"               #disk.size
    }
    disk {
        label = "512 MB Swap Image"  #disk.1.label (filesystem = "swap")
        size = "512"                 #disk.1.size
    }
}
    Note
    If your Linode uses more than two disks (for instance, if you have attached a Block Storage Volume), you need to add those disks to your Linode resource configuration block. In order to add a disk, you must add the disk to the devices stanza and create an additional disk stanza.
    Note

    If you have more than one configuration profile, you must choose which profile to boot from with the boot_config_label key. For example:

    resource "linode_instance" "example_label" {
    boot_config_label = "My Debian 9 Disk Profile"
...

  2. To check for errors in your configuration, run the plan command:

    terraform plan

    terraform plan shows you the changes that would take place if you were to apply the configurations with a terraform apply. Running terraform plan is a good way to determine if the configuration you provided is exact enough for Terraform to take over the management of your Linode.

    Caution
    Running terraform plan displays any changes that are applied to your existing infrastructure based on your configuration file(s). However, you will not be notified about the addition and removal of disks with terraform plan. For this reason, it is vital that the values you include in your linode_instance resource configuration block match the values generated from running the terraform show command.

  3. Once you have verified the configurations you provided in the linode_instance resource block, you are ready to begin managing your Linode instance with Terraform. Any changes or updates can be made by:

    • updating your linode_instance_import.tf file
    • verifying the changes with the terrform plan command
    • applying the changes with the terraform apply command

    For more available configuration options, visit the Linode Instance Terraform documentation.

Import a Domain to Terraform

Retrieve Your Domain’s ID

  1. Using the Linode CLI, retrieve a list of all your domains to find the ID of the domain you would like to manage under Terraform:

     linode-cli domains list --json --pretty

    You should see output like the following:

    [
  {
    "domain": "import-example.com",
    "id": 1157521,
    "soa_email": "webmaster@import-example.com",
    "status": "active",
    "type": "master"
  }
]

    Find the domain you would like to import and copy down the ID. You need this ID to import your domain to Terraform.

Create an Empty Resource Configuration

  1. Ensure you are in your Terraform project directory. Create a Terraform configuration file to manage the domain you import in the next section. Your file can be named anything you like, but must end in .tf. Add a Linode provider block with your API access token and an empty linode_domain resource configuration block to the file:

    File: domain_import.tf
    1
2
3
4
5

    provider "linode" {
    token = "Your API Token"
}

resource "linode_domain" "example_label" {}

Import Your Domain to Terraform

  1. Run the import command, supplying the linode_domain resource’s label, and the domain ID that was retrieved in the Retrieve Your Domain’s ID section:

     terraform import linode_domain.example_label domainID

    You should see output similar to the following:

    linode_domain.example_label: Importing from ID "1157521"...
linode_domain.example_label: Import complete!
  Imported linode_domain (ID: 1157521)
linode_domain.example_label: Refreshing state... (ID: 1157521)

Import successful!

The resources that were imported are shown above. These resources are now in
your Terraform state and will henceforth be managed by Terraform.

    This command will create a terraform.tfstate file with information about your domain. You will use this information to fill out your resource configuration.

  2. To view the information created by terraform import, run the show command. This command displays a list of key-value pairs representing information about the imported domain:

     terraform show

    You should see output like the following:

     resource "linode_domain" "example_label" {
     domain      = "import-example.com"
     expire_sec  = 0
     id          = "1157521"
     master_ips  = []
     refresh_sec = 0
     retry_sec   = 0
     soa_email   = "webmaster@import-example.com"
     status      = "active"
     tags        = []
     ttl_sec     = 0
     type        = "master"
 }

Fill In Your Domain’s Configuration Data

As mentioned in the Terraform’s Import Command section, you must manually create your resource configurations when importing existing infrastructure.

  1. Fill in the configuration values for the linode_domain resource block. The necessary values for the example resource configuration file were collected from the output of the terraform show command applied in Step 2 of the Import Your Domain to Terraform section.

    File: linode_domain_example.tf
     1
 2
 3
 4
 5
 6
 7
 8
 9
10

    provider "linode" {
    token = "1a2b3c..."
}

resource "linode_domain" "example_label" {
    domain = "import-example.com"
    soa_email = "webmaster@import-example.com"
    type = "master"
}
    Note
    If your Domain type is slave then you need to include a master_ips key with values set to the IP addresses that represent the Master DNS for your domain.

  2. Check for errors in your configuration by running the plan command:

     terraform plan

    terraform plan shows you the changes that would take place if you were to apply the configurations with the terraform apply command. Running terraform plan should result in Terraform displaying that no changes are to be made.

  3. Once you have verified the configurations you provided in the linode_domain block, you are ready to begin managing your domain with Terraform. Any changes or updates can be made by updating your linode_domain_example.tf file, then verifying the changes with the terrform plan command, and then finally applying the changes with the terraform apply command.

    For more available configuration options, visit the Linode Domain Terraform documentation.

Import a Domain Record to Terraform

Retrieve Your Domain’s ID and Your Domain Record’s ID

Due to the way the Linode API accesses domain records, you need to provide both the Domain ID and the Domain Record ID to import a Domain Record.

  1. Using the Linode CLI, retrieve a list of all your domains to find the ID of the domain that includes the record you would like to manage under Terraform:

     linode-cli domains list --json --pretty

    You should see output like the following:

    [
  {
    "domain": "import-example.com",
    "id": 1157521,
    "soa_email": "webmaster@import-example.com",
    "status": "active",
    "type": "master"
  }
]

    Find the domain that contains the record you would like to import and copy down the ID. You will need this ID to import your domain record to Terraform.

  2. Using the Linode CLI, retrieve a list of your domain’s records to find the ID of the record you would like to manage under Terraform. Substitute domainID with the ID of your domain:

    linode-cli domains records-list domainID --json --pretty

    You should see an output like the following:

    [
  {
    "id": 12331520,
    "name": "www",
    "priority": 0,
    "target": "192.0.2.0",
    "ttl_sec": 300,
    "type": "A",
    "weight": 0
  }
]

    Find the ID of the record you would like to import and copy down the ID. You will need this ID to import your domain record to Terraform.

Create an Empty Resource Configuration

  1. Ensure you are in your Terraform project directory. Create a Terraform configuration file to manage the domain record you import in the next section. Your file can be named anything you like, but must end in .tf. Add a Linode provider block with your API access token and an empty linode_domain_record resource configuration block to the file:

    File: domain_record_import.tf
    1
2
3
4
5

    provider "linode" {
    token = "Your API Token"
}

resource "linode_domain_record" "example_label" {}

Import Your Domain Record to Terraform

  1. Run the import command, supplying the linode_domain_record resource’s label, and the domain ID and domain record ID that were retrieved in the Retrieve Your Domain’s ID and Your Record’s ID section:

     terraform import linode_domain_record.example_label domainID,recordID

    You should see output similar to the following:

    linode_domain_record.example_label: Importing from ID "1157521,12331520"...
linode_domain_record.example_label: Import complete!
  Imported linode_domain_record (ID: 12331520)
linode_domain_record.example_label: Refreshing state... (ID: 12331520)

Import successful!

The resources that were imported are shown above. These resources are now in
your Terraform state and will henceforth be managed by Terraform.

    This command will create a terraform.tfstate file with information about your domain record. You will use this information to fill out your resource configuration.

  2. To view the information created by terraform import, run the show command. This command displays a list of key-value pairs representing information about the imported domain:

     terraform show

    You should see output like the following:

     resource "linode_domain_record" "example_label" {
     domain_id   = 1068029
     id          = "12331520"
     name        = "www"
     port        = 80
     priority    = 10
     record_type = "A"
     target      = "192.0.2.0"
     ttl_sec     = 300
     weight      = 5
 }

Fill In Your Domain Record’s Configuration Data

As mentioned in the Terraform’s Import Command section, you must manually create your resource configurations when importing existing infrastructure.

  1. Fill in the configuration values for the linode_domain_record resource block. The necessary values for the example resource configuration file were collected from the output of the terraform show command applied in Step 2 of the Import Your Domain Record to Terraform section.

    File: domain_record_import.tf
     1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15

    provider "linode" {
    token = "1a2b3c..."
}

resource "linode_domain_record" "example_label" {
    domain_id = "1157521"
    name = "www"
    record_type = "A"
    target = "192.0.2.0"
    ttl_sec = "300"
    port = 80
    priority = 10
    weight = 5
}

  2. Check for errors in your configuration by running the plan command:

     terraform plan

    terraform plan shows you the changes that would take place if you were to apply the configurations with the terraform apply command. Running terraform plan should result in Terraform displaying that no changes are to be made.

  3. Once you have verified the configurations you provided in the linode_domain_record block, you are ready to begin managing your domain record with Terraform. Any changes or updates can be made by updating your domain_record_import.tf file, then verifying the changes with the terrform plan command, and then finally applying the changes with the terraform apply command.

    For more available configuration options, visit the Linode Domain Record Terraform documentation.

Import a Block Storage Volume to Terraform

Retrieve Your Block Storage Volume’s ID

  1. Using the Linode CLI, retrieve a list of all your volumes to find the ID of the Block Storage Volume you would like to manage under Terraform:

     linode-cli volumes list --json --pretty

    You should see output similar to the following:

    [
  {
    "id": 17045,
    "label": "import-example",
    "linode_id": 11426126,
    "region": "us-east",
    "size": 20,
    "status": "active"
  }
]

    Find the Block Storage Volume you would like to import and copy down the ID. You will use this ID to import your volume to Terraform.

Create an Empty Resource Configuration

  1. Ensure you are in your Terraform project directory. Create a Terraform configuration file to manage the Block Storage Volume you import in the next section. Your file can be named anything you like, but must end in .tf. Add a Linode provider block with your API access token and an empty linode_volume resource configuration block to the file:

    File: linode_volume_example.tf
    1
2
3
4
5

    provider "linode" {
    token = "Your API Token"
}

resource "linode_volume" "example_label" {}

Import Your Volume to Terraform

  1. Run the import command, supplying the linode_volume resource’s label, and the volume ID that was retrieved in the Retrieve Your Block Storage Volume’s ID section:

     terraform import linode_volume.example_label volumeID

    You should see output similar to the following:

    linode_volume.example_label: Importing from ID "17045"...
linode_volume.example_label: Import complete!
  Imported linode_volume (ID: 17045)
linode_volume.example_label: Refreshing state... (ID: 17045)

Import successful!

The resources that were imported are shown above. These resources are now in
your Terraform state and will henceforth be managed by Terraform.

    This command will create a terraform.tfstate file with information about your Volume. You will use this information to fill out your resource configuration.

  2. To view the information created by terraform import, run the show command. This command displays a list of key-value pairs representing information about the imported Volume:

    terraform show

    You should see output like the following:

    resource "linode_volume" "example_label" {
    filesystem_path = "/dev/disk/by-id/scsi-0Linode_Volume_test-volume"
    id              = "17045"
    label           = "import-example"
    linode_id       = 11426126
    region          = "us-east"
    size            = 20
    status          = "active"
    tags            = []

    timeouts {}
}

Fill In Your Volume’s Configuration Data

As mentioned in the Terraform’s Import Command section, you must manually create your resource configurations when importing existing infrastructure.

  1. Fill in the configuration values for the linode_volume resource block. The necessary values for the example resource configuration file were collected from the output of the terraform show command applied in Step 2 of the Import Your Volume to Terraform section:

    File: linode_volume_example.tf
     1
 2
 3
 4
 5
 6
 7
 8
 9
10

    provider "linode" {
    token = "1a2b3c..."
}

resource "linode_volume" "example_label" {
    label = "import-example"
    region = "us-east"
    size = "20"
}
    Note
    Though it is not required, it’s a good idea to include a configuration for the size of the volume. This allows it to be managed more easily should you ever choose to expand the Volume. It is not possible to reduce the size of a volume.

  2. Check for errors in your configuration by running the plan command:

     terraform plan

    terraform plan shows you the changes that would take place if you were to apply the configurations with the terraform apply command. Running terraform plan should result in Terraform displaying that no changes are to be made.

  3. Once you have verified the configurations you provided in the linode_volume block, you are ready to begin managing your Block Storage Volume with Terraform. Any changes or updates can be made by updating your linode_volume_example.tf file, then verifying the changes with the terrform plan command, and then finally applying the changes with the terraform apply command.

    For more optional configuration options, visit the Linode Volume Terraform documentation.

Import a NodeBalancer to Terraform

Configuring Linode NodeBalancers with Terraform requires three separate resource configuration blocks: one to create the NodeBalancer, a second for the NodeBalancer Configuration, and a third for the NodeBalancer Nodes.

Retrieve Your NodeBalancer, NodeBalancer Config, NodeBalancer Node IDs

  1. Using the Linode CLI, retrieve a list of all your NodeBalancers to find the ID of the NodeBalancer you would like to manage under Terraform:

     linode-cli nodebalancers list --json --pretty

    You should see output similar to the following:

    [
  {
    "client_conn_throttle": 0,
    "hostname": "nb-192-0-2-3.newark.nodebalancer.linode.com",
    "id": 40721,
    "ipv4": "192.0.2.3",
    "ipv6": "2600:3c03:1::68ed:945f",
    "label": "terraform-example",
    "region": "us-east"
  }
]

    Find the NodeBalancer you would like to import and copy down the ID. You will use this ID to import your NodeBalancer to Terraform.

  2. Retrieve your NodeBalancer configuration by supplying the ID of the NodeBalancer you retrieved in the previous step:

     linode-cli nodebalancers configs-list 40721 --json --pretty

    You should see output similar to the following:

    [
  {
    "algorithm": "roundrobin",
    "check_passive": true,
    "cipher_suite": "recommended",
    "id": 35876,
    "port": 80,
    "protocol": "http",
    "ssl_commonname": "",
    "ssl_fingerprint": "",
    "stickiness": "table"
  }
]

    Copy down the ID of your NodeBalancer configuration, you will use it to import your NodeBalancer configuration to Terraform.

  3. Retrieve a list of Nodes corresponding to your NodeBalancer to find the label and address of your NodeBalancer Nodes. Supply the ID of your NodeBalancer as the first argument and the ID of your NodeBalancer configuration as the second:

     linode-cli nodebalancers nodes-list 40721 35876 --json --pretty

    You should see output like the following:

    [
  {
    "address": "192.168.214.37:80",
    "id": 327539,
    "label": "terraform-import",
    "mode": "accept",
    "status": "UP",
    "weight": 100
  }
]

    If you are importing a NodeBalancer, chances are your output lists more than one Node. Copy down the IDs of each Node. You will use them to import your Nodes to Terraform.

Create Empty Resource Configurations

  1. Ensure you are in your Terraform project directory. Create a Terraform configuration file to manage the NodeBalancer you import in the next section. Your file can be named anything you like, but must end in .tf.

    Add a Linode provider block with your API access token and empty linode_nodebalancer, linode_nodebalancer_config, and linode_nodebalancer_node resource configuration blocks to the file. Be sure to give the resources appropriate labels. These labels are used to reference the resources locally within Terraform:

    File: linode_nodebalancer_example.tf
    1
2
3
4
5
6
7
8
9

    provider "linode" {
    token = "Your API Token"
}

resource "linode_nodebalancer" "example_nodebalancer_label" {}

resource "linode_nodebalancer_config" "example_nodebalancer_config_label" {}

resource "linode_nodebalancer_node" "example_nodebalancer_node_label" {}

    If you have more than one NodeBalancer Configuration, you will need to supply multiple linode_nodebalancer_config resource blocks with different labels. The same is true for each NodeBalancer Node requiring an additional linode_nodebalancer_node block.

Import Your NodeBalancer, NodeBalancer Configuration, and NodeBalancer Nodes to Terraform

  1. Run the import command for your NodeBalancer, supplying your local label and the ID of your NodeBalancer as the last parameter.

    terraform import linode_nodebalancer.example_nodebalancer_label nodebalancerID

    You should see output similar to the following:

    linode_nodebalancer.example_nodebalancer_label: Importing from ID "40721"...
linode_nodebalancer.example_nodebalancer_label: Import complete!
  Imported linode_nodebalancer (ID: 40721)
linode_nodebalancer.example_nodebalancer_label: Refreshing state... (ID: 40721)

Import successful!

The resources that were imported are shown above. These resources are now in
your Terraform state and will henceforth be managed by Terraform.

  2. Run the import command for your NodeBalancer configuration, supplying your local label, and the ID of your NodeBalancer and the ID of your NodeBalancer configuration separated by commas as the last argument.

    terraform import linode_nodebalancer_config.example_nodebalancer_config_label nodebalancerID,nodebalancerconfigID

    You should see output similar to the following:

    linode_nodebalancer_config.example_nodebalancer_config_label: Importing from ID "40721,35876"...
linode_nodebalancer_config.example_nodebalancer_config_label: Import complete!
  Imported linode_nodebalancer_config (ID: 35876)
linode_nodebalancer_config.example_nodebalancer_config_label: Refreshing state... (ID: 35876)

Import successful!

The resources that were imported are shown above. These resources are now in
your Terraform state and will henceforth be managed by Terraform.

  3. Run the import command for you NodeBalancer Nodes, supplying your local label, and the ID of your NodeBalancer, the ID of your NodeBalancer Configuration, and your NodeBalancer Node, separated by commas, as the last argument.

    terraform import linode_nodebalancer_node.example_nodebalancer_node_label nodebalancerID,nodebalancerconfigID,nodebalancernodeID

    You should see output like the following:

    linode_nodebalancer_node.example_nodebalancer_node_label: Importing from ID "40721,35876,327539"...
linode_nodebalancer_node.example_nodebalancer_node_label: Import complete!
  Imported linode_nodebalancer_node (ID: 327539)
linode_nodebalancer_node.example_nodebalancer_node_label: Refreshing state... (ID: 327539)

Import successful!

The resources that were imported are shown above. These resources are now in
your Terraform state and will henceforth be managed by Terraform.

  4. Running terraform import creates a terraform.tfstate file with information about your NodeBalancer. You use this information to fill out your resource configuration. To view the information created by terraform import, run the show command:

    terraform show

    You should see output like the following:

    # linode_nodebalancer.example_nodebalancer_label:
resource "linode_nodebalancer" "example_nodebalancer_label" {
    client_conn_throttle = 0
    created              = "2019-08-07T15:22:46Z"
    hostname             = "nb-23-92-23-94.newark.nodebalancer.linode.com"
    id                   = "40721"
    ipv4                 = "23.92.23.94"
    ipv6                 = "2600:3c03:1::175c:175e"
    label                = "terraform-import"
    region               = "us-east"
    tags                 = []
    transfer             = {
        "in"    = "0.011997222900390625"
        "out"   = "0.000457763671875"
        "total" = "0.012454986572265625"
    }
    updated              = "2019-08-07T15:22:46Z"
}

# linode_nodebalancer_config.example_nodebalancer_config_label:
resource "linode_nodebalancer_config" "example_nodebalancer_config_label" {
    algorithm       = "roundrobin"
    check           = "none"
    check_attempts  = 2
    check_interval  = 5
    check_passive   = true
    check_timeout   = 3
    cipher_suite    = "recommended"
    id              = "44520"
    node_status     = {
        "down" = "0"
        "up"   = "1"
    }
    nodebalancer_id = 50629
    port            = 80
    protocol        = "http"
    stickiness      = "table"
}

# linode_nodebalancer_node.example_nodebalancer_node_label:
resource "linode_nodebalancer_node" "example_nodebalancer_node_label" {
    address         = "192.168.214.37:80"
    config_id       = 35876
    id              = "419783"
    label           = "terraform-import"
    mode            = "accept"
    nodebalancer_id = 50629
    status          = "UP"
    weight          = 100
}

Fill In Your NodeBalancer’s Configuration Data

As mentioned in the Terraform’s Import Command section, you must manually create your resource configurations when importing existing infrastructure.

  1. Fill in the configuration values for all three NodeBalancer resource configuration blocks. The necessary values for the example resource configuration file were collected from the output of the terraform show command applied in Step 4 of the Import Your NodeBalancer, NodeBalancer Configuration, and NodeBalancer Nodes to Terraform section:

    File: linode_nodebalancer_example.tf
     1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20

    provider "linode" {
    token = "1a2b3c..."
}

resource "linode_nodebalancer" "nodebalancer_import" {
    label = "terraform-example"
    region = "us-east"
}

resource "linode_nodebalancer_config" "nodebalancer_config_import" {
    nodebalancer_id = "40721"
}

resource "linode_nodebalancer_node" "nodebalancer_node_import" {
    label = "terraform-import"
    address = "192.168.214.37:80"
    nodebalancer_id = "40721"
    config_id = "35876"
}

  2. Check for errors in your configuration by running the plan command:

     terraform plan

    terraform plan shows you the changes that would take place if you were to apply the configurations with the terraform apply command. Running terraform plan should result in Terraform displaying that no changes are to be made.

  3. Once you have verified the configurations you provided in all three NodeBalancer configuration blocks, you are ready to begin managing your NodeBalancers with Terraform. Any changes or updates can be made by updating your linode_nodebalancer_example.tf file, then verifying the changes with the terrform plan command, and finally, applying the changes with the terraform apply command.

    For more available configuration options, visit the Linode NodeBalancer, Linode NodeBalancer Config, and Linode NodeBalancer Node Terraform documentation.

Next Steps

You can follow a process similar to what has been outlined in this guide to begin importing other pieces of your Linode infrastructure such as images, SSH keys, access tokens, and StackScripts. Check out the links in the More Information section below for helpful information.

More Information

You may wish to consult the following resources for additional information on this topic. While these are provided in the hope that they will be useful, please note that we cannot vouch for the accuracy or timeliness of externally hosted materials.

This page was originally published on

Your Feedback Is Important

Let us know if this guide was helpful to you.

Join the conversation.
Read other comments or post your own below. Comments must be respectful, constructive, and relevant to the topic of the guide. Do not post external links or advertisements. Before posting, consider if your comment would be better addressed by contacting our Support team or asking on our Community Site.