Install a LAMP Stack on Debian 10 (Buster)

A LAMP stack is a particular bundle of software packages commonly used for hosting web content. The bundle consists of Linux, Apache, MariaDB, and PHP. This guide shows you how to install a LAMP stack on Debian 10 (Buster).

Prior to installing your LAMP stack ensure that:

1. Ensure that you have followed the Getting Started and Securing Your Server guides. Ensure that the Linode’s hostname is set.

   Check your Linode’s hostname. The first command should show your short hostname and the second should show your fully qualified domain name (FQDN).

   hostname
   hostname -f
   

   Note

   If you have a registered domain name for your website, then add the domain to the Linode server on which you plan to install the LAMP stack. If you do not have a registered domain name, then replace example.com with the IP address of the Linode server in the following instructions.

2. Update your system:

   sudo apt-get update && sudo apt-get upgrade
   

   Note

   This guide is written for a non-root user. Commands that require elevated privileges are prefixed with sudo. If you’re not familiar with the sudo command, you can check our Users and Groups guide.

1. Install Apache 2.4:

   sudo apt-get install apache2
   

2. Open /etc/apache2/mods-available/mpm_prefork.conf in your text editor and edit the values as needed. The following is optimized for a 2GB Linode:

   Note

   As a best practice, you should create a backup of your Apache configuration file, before making any configuration changes to your Apache installation. To make a backup in your home directory:

   cp /etc/apache2/apache2.conf ~/apache2.conf.backup
   

   File: /etc/apache2/mods-available/mpm_prefork.conf

   1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

   # prefork MPM # StartServers: number of server processes to start # MinSpareServers: minimum number of server processes which are kept spare # MaxSpareServers: maximum number of server processes which are kept spare # MaxRequestWorkers: maximum number of server processes allowed to start # MaxConnectionsPerChild: maximum number of requests a server process serves <IfModule mpm_prefork_module> StartServers 4 MinSpareServers 20 MaxSpareServers 40 MaxRequestWorkers 200 MaxConnectionsPerChild 4500 </IfModule> # vim: syntax=apache ts=4 sw=4 sts=4 sr noet

   Note

   These settings are good starting points, but they should be adjusted to best suit your deployment’s needs.

3. Enable the firewall to allow web traffic. This guide lists the commands to enable web traffic if you configured UFW on your server.

   a. Check the ports that are enabled for WWW Full Profile:

   sudo apt install ufw
   sudo ufw app info "WWW Full"
   

   Ports 80 and 443 should be listed as enabled for WWW Full profile.

   b. To allow incoming HTTP and HTTPS traffic for WWW Full profile:

   sudo ufw allow in "WWW Full"
   

4. On Debian 10, the event module is enabled by default. This should be disabled, and the prefork module enabled:

   sudo a2dismod mpm_event
   sudo a2enmod mpm_prefork
   

5. Restart Apache:

   sudo systemctl restart apache2
   

There can be as many virtual hosts files as needed to support the amount of domains hosted on the Linode.

1. Create directories for your websites and websites’ logs, replacing example.com with your own domain name:

   sudo mkdir -p /var/www/html/example.com/{public_html,logs}
   

   Repeat the process if you intend on hosting multiple websites on your Linode.

2. Create a copy of the default Apache configuration file for your site:

    sudo cp /etc/apache2/sites-available/000-default.conf /etc/apache2/sites-available/example.com.conf
   

3. Edit the example.com.conf file in /etc/apache2/sites-available with your text editor, replacing instances of example.com with your own domain URL in both the configuration file and in the file name:

   File: /etc/apache2/sites-available/example.com.conf

   1 2 3 4 5 6 7 8 9 10 11

   <Directory /var/www/html/example.com/public_html> Require all granted </Directory> <VirtualHost *:80> ServerAdmin webmaster@example.com ServerName example.com ServerAlias www.example.com DocumentRoot /var/www/html/example.com/public_html ErrorLog /var/www/html/example.com/logs/error.log CustomLog /var/www/html/example.com/logs/access.log combined </VirtualHost>

   Repeat this process for any other domains you host:

   File: /etc/apache2/sites-available/example.org.conf

   1 2 3 4 5 6 7 8 9 10 11 12

   <Directory /var/www/html/example.org/public_html> Require all granted </Directory> <VirtualHost *:80> ServerAdmin webmaster@example.org ServerName example.org ServerAlias www.example.org DocumentRoot /var/www/html/example.org/public_html ErrorLog /var/www/html/example.org/logs/error.log CustomLog /var/www/html/example.org/logs/access.log combined </VirtualHost>

4. Assign ownership of public_html directory to the user www-data:

   sudo chown -R www-data:www-data /var/www/html/example.com/public_html
   

5. Set the permissions for the public_html directory:

    sudo chmod -R 755 /var/www/html/example.com/public_html
   

6. Link your virtual host file from the sites-available directory to the sites-enabled directory:

   sudo a2ensite example.com
   sudo a2ensite example.org
   

   Note

   If you need to disable a site, you can use issue the following command:

   sudo a2dissite example.com
   

7. Disable the default virtual host to minimize security risks:

   sudo a2dissite 000-default.conf
   

8. Restart Apache:

   sudo systemctl restart apache2
   

MariaDB is a relational database management system (RDBMS) and is a popular component of many applications.

1. Install MariaDB:

   sudo apt-get install mariadb-server
   

   Input a secure password when prompted by the installation.

2. Run mysql_secure_installation to remove the test database and any extraneous user permissions added during the initial installation process:

   sudo mysql_secure_installation
   

   It is recommended that you select yes (y) for all questions. If you already have a secure root password, you do not need to change it.

Next, you can create a database and grant your users permissions to use databases.

1. Log in to MariaDB:

   sudo mysql -u root -p
   

   Enter MariaDB’s root password when prompted.

2. Create a database and grant your users permissions on it. Change the database name (webdata) and username (webuser). Change the password (password):

   create database webdata;
   grant all on webdata.* to 'webuser' identified by 'password';
   

3. Exit MariaDB:

   quit
   

PHP makes it possible to produce dynamic and interactive pages using your own scripts and popular web development frameworks.

PHP 7.3 is the latest version available and has the longest period of support offered as of this guide’s publishing:

1. Install PHP, the PHP Extension and Application Repository, Apache support, and MySQL support:

   sudo apt install php7.3 libapache2-mod-php7.3 php-mysql
   

   Optionally, install additional cURL, JSON, and CGI support:

   sudo apt install php-curl php-json php-cgi
   

1. Open /etc/php/7.3/apache2/php.ini in your text editor and edit the following values. These settings are optimized for the 2GB Linode:

   File: /etc/php/7.3/apache2/php.ini

   1 2 3

   error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR error_log = /var/log/php/error.log max_input_time = 30

   Note

   Ensure that all values are uncommented, by making sure they do not start with a semicolon (;).

2. Create the log directory for PHP and give ownership to the Apache user (www-data):

   sudo mkdir /var/log/php
   sudo chown www-data /var/log/php
   

   Note

   If you plan on using your LAMP stack to host a WordPress server, install additional PHP modules: sudo apt install php-gd php-mbstring php-xml php-xmlrpc

3. Restart Apache:

   sudo systemctl restart apache2
   

4. Visit your site’s domain (or IP address). You should see Apache’s default welcome page. Your LAMP stack should be installed and is ready to host your site files.

In this section, you’ll create a test page that shows whether Apache can render PHP and connect to the MariaDB database. This can be helpful in locating the source of an error if one of the elements of your LAMP stack is not communicating with the others.

1. Paste the following code into a new file, phptest.php, in the public_html directory. Modify webuser and password to match the information entered in the Set Up a MariaDB Database section above:

   File: /var/www/html/example.com/public_html/phptest.php

   1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

   <html> <head> <title>PHP Test</title> </head> <body> <?php echo '<p>Hello World</p>'; // In the variables section below, replace user and password with your own MariaDB credentials as created on your server $servername = "localhost"; $username = "webuser"; $password = "password"; // Create MariaDB connection $conn = mysqli_connect($servername, $username, $password); // Check connection - if it fails, output will include the error message if (!$conn) { die('<p>Connection failed: </p>' . mysqli_connect_error()); } echo '<p>Connected successfully</p>'; ?> </body> </html>

2. Navigate to example.com/phptest.php from your local machine. If the components of your LAMP stack are working correctly, the browser will display a “Connected successfully” message. If not, the output will be an error message.

3. Remove the test file:

   sudo rm /var/www/html/example.com/public_html/phptest.php
   

More Information

You may wish to consult the following resources for additional information on this topic. While these are provided in the hope that they will be useful, please note that we cannot vouch for the accuracy or timeliness of externally hosted materials.

• Debian Linux Home Page
• Apache HTTP Server Documentation
• MySQL Documentation
• PHP Documentation