Copy a Disk Over SSH

Piping SSH commands to utilities such as dd, gzip, or rsync is an easy way to copy a Linode’s data into a single file for later extraction. This can effectively back up your Linode’s disk or migrate your installed system among Linodes.

This guide demonstrates how to download a .img file to your computer over SSH containing a block-level copy of your Linode’s disk device created with dd.

Note

If the amount of data on your disk is much less than the size of the disk, then downloading a copy with dd can take longer than just downloading your files. If you’re interested in downloading individual files or directories, review the options listed in our Download Files from Your Linode and Backing Up Your Data guides.

This guide shows you how to download a Linode’s disk image over SSH to a separate receiving system, like a personal computer, by executing commands on both the Origin Linode as the origin of your disk image, and the Receiving System which will receive a copy of this image. The terms “origin Linode” and “receiving system” are used throughout this guide to describe these two separate environments.

While this guide has been written to accommodate computers running Linux as their operating system, if the receiving system is instead running Microsoft Windows, there are multiple SSH solutions available such as Cygwin and PuTTY which can alternatively be used to complete this process.

1. Reboot Your origin Linode into Rescue Mode and connect to it using Lish.

2. Set a root password for the rescue system and start the SSH server:

   passwd
   service ssh start
   

1. Prepare the receiving system to download the disk image by verifying that SSH is installed. Most Linux/Unix-like systems include OpenSSH in their package base by default.

2. Copy the disk over SSH from the origin Linode to the receiving system. Run the following command on the receiving system, replacing 192.0.2.9 with the origin Linode’s IP address and /home/archive/linode.img with the path where you want to store the disk.

   ssh root@192.0.2.9 "dd if=/dev/sda " | dd of=/home/archive/linode.img status=progress
   

3. The receiving system is now connected to the Linode, prompting you to verify that the SSH key fingerprints are valid. If valid, type yes and press Enter to continue:

   The authenticity of host '192.0.2.9 (192.0.2.9)' can't be established.
   RSA key fingerprint is 39:6b:eb:05:f1:28:95:f0:da:63:17:9e:6b:6b:11:4a.
   Are you sure you want to continue connecting (yes/no)? yes
   

4. The receiving system is prompted to enter the root password you created for the origin Linode in rescue mode. Enter this password now:

    Warning: Permanently added '192.0.2.9' (RSA) to the list of known hosts.
    root@192.0.2.9's password:
   

   When the transfer completes, you see a summary output similar to the output below:

           4096000+0 records in
           4096000+0 records out
           2097152000 bytes (2.1 GB) copied, 371.632 seconds, 5.6 MB/s
       

   Copying your disk can take a while. If you have a slow internet connection, add the -C option to the SSH command to enable gzip compression of the disk image. If you receive a Write failed: Broken pipe error, repeat this process.

Once the copy has completed, verify it by mounting the image on the receiving system with the following commands.

1. Switch to the root user:

   su
   

2. Make a directory to mount the disk:

   mkdir linode
   

3. Mount the disk in the directory created in the previous step. Replace linode.img with the name of your Linode’s disk.

   mount -o loop linode.img linode
   

4. List the directories on the disk to indicate if everything has transferred. Your output of ls is similar to below:

   ls linode
   

           bin   dev  home  lost+found  mnt  proc  sbin     srv  tmp  var
           boot  etc  lib   media       opt  root  selinux  sys  usr

In some cases, it is necessary to upload your disk image to a new server. For example, if you previously downloaded your Linode disk and deleted the Linode to halt billing on it, you can create a new Linode at a later date and upload the disk to resume your services. This section of the guide assumes that you are creating a new Linode with the default primary and swap disk as outlined in the Creating a Compute Instance guide.

1. Once you’ve created a Linode with enough disk space available to accommodate your disk image, prepare the new Linode to receive this image. This is completed by first deleting the primary disk created by default, and keeping the swap disk. A swap disk typically starts at 256 MB or 512 MB in size, but can be larger or smaller depending upon your needs.

2. Access your Linode through the Linode Cloud Manager. Click the Storage tab to navigate to the Disks section.

3. On the following page in the Disks menu, select the ellipsis next to any primary disks you are replacing and select Delete.

4. Next, select Add a Disk.

5. The Add a Disk panel appears. Select the Create Empty Disk option, enter a Label that you can use as a personal identifier, select the file system that matches the format of the disk that was downloaded over SSH, and enter a Size that is large enough to hold the contents of the disk you are uploading. Click Save Changes.

6. Reboot Your Linode into Rescue Mode and start the secure SSH server using the following commands:

    passwd
    service ssh start
   

7. Upload the disk image you have saved remotely over SSH to the new Linode. Replace 192.0.2.9 with the Linode’s IP address and /home/archive/linode.img with the disk images’s path.

    dd if=/home/archive/linode.img | ssh root@192.0.2.9 "dd of=/dev/sda"
   

   When the transfer completes, you see a summary output similar to below:

           49807360+0 records in
           49807360+0 records out
           25501368320 bytes (26 GB) copied, 9462.12 s, 2.7 MB/s

   Copying your disk can take a while. If you receive a Write failed: Broken pipe error, repeat this process.

If the disk you created on the new server is larger than the source disk (for example you’re transferring a disk from a smaller Linode to a larger Linode), you have to resize the file system to make use of the new space.

You can check if this is necessary by comparing the space of the file system to the space of the new disk:

    root@localhost:~# df -h
    Filesystem      Size  Used Avail Use% Mounted on
    /dev/sda         24G   19G  4.0G  83% /

    root@localhost:~# lsblk
    NAME  MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
    sda     8:0    0   30G  0 disk /

In the above example, the values in the Size column don’t match. Although the disk is 30 GB, the file system can only see 24 GB.

To use all available space on the new disk, execute the following from Rescue Mode. Replace /dev/sdx with your system disk’s device identifier (/dev/sda, /dev/sdb, etc.).

e2fsck -f /dev/sdx
resize2fs /dev/sdx

You now need to create a new configuration profile on the receiving Linode.

1. Select your Linode, click the Configurations tab, then select Add a Configuration.

2. The Add Linode Configuration panel appears.

   

3. Enter a name for the configuration profile in the Label field, and in the Block Device Assignment section set the /dev/sda to the new system disk you created earlier in this section of the guide. Set /dev/sdb to the swap image.

4. The Linode is now ready to reboot using the new system disk.